2007 Mazda 6 Recalls

Launch Date 09/02/2009
Recalls Number R/2008/194
Make MAZDA
Recalls Model Information Mazda 3 5 6 and 6 Wagon (fitted with RF Diesel engine)
ENGINE REVS MAY INCREASE INADVERTENTLY
It is possible that white smoke can occur from the exhaust pipe and engine speed may increase whilst driving.
Recall affected vehicles and replace Power Control Module.
Vehicle Numbers 15854
Manufacturer Ref
Model 6
VIN Start JMZGY******401609
VIN End JMZGY******479004
Build Start 26/04/2005
Build End 01/11/2007

Launch Date 09/02/2009
Recalls Number R/2008/194
Make MAZDA
Recalls Model Information Mazda 3 5 6 and 6 Wagon (fitted with RF Diesel engine)
ENGINE REVS MAY INCREASE INADVERTENTLY
It is possible that white smoke can occur from the exhaust pipe and engine speed may increase whilst driving.
Recall affected vehicles and replace Power Control Module.
Vehicle Numbers 15854
Manufacturer Ref
Model 6
VIN Start JMZGG******606300
VIN End JMZGG******731062
Build Start 27/04/2005
Build End 28/09/2007

Launch Date 29/04/2016
Recalls Number R/2016/084
Make MAZDA
Recalls Model Information RX-8 & BT-50
DRIVER'S FRONT AIRBAG MAY FAIL TO DEPLOY CORRECTLY
Continued exposure to high levels of absolute humidity may cause the driver’s front airbag inflator housing to rupture and deploy abnormally in the event of a crash necessitating deployment of the driver’s front airbag. Should the inflator rupture it could result in metal fragments striking the driver or other vehicle occupants.
On affected vehicles replace air bag inflator
Vehicle Numbers 32030
Manufacturer Ref AF037A
Model 6
VIN Start
VIN End
Build Start
Build End

Launch Date 12/12/2003
Recalls Number R/2003/099
Make MAZDA
Recalls Model Information MPV/MX-5/MAZDA 6
FOG LAMP SECURITY CONCERN.
Repeated thermal expansion and shrinkage in use may cause the front fog light socket holder to become detached from the fog light case. As a consequence an exposed hot bulb may come into contact with part of the vehicle body or fittings.
Attach a spring to the rear of the fog light to prevent the socket holder detaching from the fog light case.
Vehicle Numbers 28339
Manufacturer Ref
Model 6
VIN Start JMZGG******100113
VIN End JMZGG******169924
Build Start
Build End

Launch Date 12/12/2003
Recalls Number R/2003/099
Make MAZDA
Recalls Model Information MPV/MX-5/MAZDA 6
FOG LAMP SECURITY CONCERN.
Repeated thermal expansion and shrinkage in use may cause the front fog light socket holder to become detached from the fog light case. As a consequence an exposed hot bulb may come into contact with part of the vehicle body or fittings.
Attach a spring to the rear of the fog light to prevent the socket holder detaching from the fog light case.
Vehicle Numbers 28339
Manufacturer Ref
Model 6
VIN Start JMZGY******100039
VIN End JMZGY******127717
Build Start
Build End

Launch Date 31/05/2017
Recalls Number R/2017/150
Make MAZDA
Recalls Model Information 2 3 & 6
MOUNTING POINTS FOR SEAT RUNNER MAY FAIL
One or more of the mounting points between the runner and the driver’s seat may fail.
On affected vehicles inspect the driver’s seat frame to determine if seat lifter links are damaged. If no damage is evident fit reinforcement brackets and “push nuts”. If damage is present to the seat lifter link replace seat frame. If damage is restricted to stabilizer bar then the bar will be repaired plus brackets and” push nuts” fitted.
Vehicle Numbers 95172
Manufacturer Ref
Model 6
VIN Start JMZGH12B601223318
VIN End JMZGHA9L601432469
Build Start 05/09/2007
Build End 31/08/2010

Launch Date 22/02/2017
Recalls Number R/2017/048
Make MAZDA
Recalls Model Information Mazda 6
AIRBAG MAY MALFUNCTION
It has been identified that the density of the propellant within the airbag inflator may be insufficient due to inappropriate production and storage conditions of the propellant. In this condition the inflator may abnormally ignite at the time of the airbag deployment allowing the inner pressure of the inflator to increase abnormally resulting in the breakage of the inflator case. In this condition the airbags will not provide adequate protection during a frontal impact as the broken pieces of the inflator case could injure the driver and/or front seat passenger.
Recall all affected vehicles to replace the driver and passenger front airbag inflators with modified units.
Vehicle Numbers 12306
Manufacturer Ref
Model 6
VIN Start JMZGY******400026
VIN End JMZGY******468025
Build Start 14/03/2005
Build End 09/04/2007

Launch Date 22/02/2017
Recalls Number R/2017/048
Make MAZDA
Recalls Model Information Mazda 6
AIRBAG MAY MALFUNCTION
It has been identified that the density of the propellant within the airbag inflator may be insufficient due to inappropriate production and storage conditions of the propellant. In this condition the inflator may abnormally ignite at the time of the airbag deployment allowing the inner pressure of the inflator to increase abnormally resulting in the breakage of the inflator case. In this condition the airbags will not provide adequate protection during a frontal impact as the broken pieces of the inflator case could injure the driver and/or front seat passenger.
Recall all affected vehicles to replace the driver and passenger front airbag inflators with modified units.
Vehicle Numbers 12306
Manufacturer Ref
Model 6
VIN Start JMZGG******600034
VIN End JMZGG******660106
Build Start 14/03/2005
Build End 09/04/2007

Launch Date 08/08/2003
Recalls Number R/2003/098
Make MAZDA
Recalls Model Information MAZDA 6
BRAKE FLUID LEVEL WARNING LIGHT MAY BECOME INOPERATIVE.
The brake fluid reservoir may expand temporarily during pressure bleeding of the system. This may cause the float of the fluid level sensor to seize or be displaced - resulting in non-operation of the warning light.
Check position and operation of the float and adjust where necessary. Additionally attach a caution label to the reservoir concerning the brake fluid bleeding pressure.
Vehicle Numbers 16332
Manufacturer Ref
Model 6
VIN Start JMZGG******100113
VIN End JMZGG******184907
Build Start
Build End

Launch Date 08/08/2003
Recalls Number R/2003/098
Make MAZDA
Recalls Model Information MAZDA 6
BRAKE FLUID LEVEL WARNING LIGHT MAY BECOME INOPERATIVE.
The brake fluid reservoir may expand temporarily during pressure bleeding of the system. This may cause the float of the fluid level sensor to seize or be displaced - resulting in non-operation of the warning light.
Check position and operation of the float and adjust where necessary. Additionally attach a caution label to the reservoir concerning the brake fluid bleeding pressure.
Vehicle Numbers 16332
Manufacturer Ref
Model 6
VIN Start JMZGY******100039
VIN End JMZGY******134865
Build Start
Build End

Launch Date 07/09/98
Recalls Number R/1998/073
Make MAZDA
Recalls Model Information 626 GF & GW variants (Diesel only)
ENGINE MAY STALL WHILST DRIVING
The engine may stop while driving and can not be restarted. The strength of the inner part of the spill valve on the fuel injection pump is insufficient and may fail as a result of repeated injection pressure. As a result fuel can not be injected into the combustion chambers.
Recall the potentially affected vehicles examine the fuel injection pump and where appropriate replace the spill valves with quality assured units.
Vehicle Numbers 58
Manufacturer Ref
Model 626
VIN Start JMZ GF1*R2 01186527 to 01196282
VIN End
Build Start
Build End 31/05/1998

Vehicle History Report

  • Sales History
  • Service History
  • Vehicle Theft Check
  • Odometer Reading
  • Market Value

Free VIN check

  • VIN lookup
  • Vehicle Specifications
  • Equipment Details
  • Fuel Efficiency
  • Ownership History

Car Recalls and Defects

  • Recalls and Defects
  • Problems & Complaints
  • Safety Ratings
  • Warranty