2008 Peugeot 307 Recalls

Launch Date 23/02/2006
Recalls Number R/2006/041
Make PEUGEOT
Recalls Model Information 307 406 607 and 807
FUEL MAY LEAK
Due to a potential fault in the engine management system an internal engine fuel leak via the injectors may occur following switching off. This would result in the engine failing to restart due to excess fuel being present in the inlet manifold or cylinders.
To address the issue recalled vehicles will receive an engine management download.
Vehicle Numbers 4338
Manufacturer Ref X9D
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 16/10/2009
Recalls Number R/2009/104
Make PEUGEOT
Recalls Model Information 307 & Expert III
LIGHTS MAY SWITCH OFF UNEXPECTEDLY
In rare cases the lighting management system may incorrectly detect the lighting switch ring position which may cause the lights to cut out.
Recall affected vehicles and download new version of vehicle exterior lighting software
Vehicle Numbers 48938
Manufacturer Ref YSC
Model 307
VIN Start VF3******84783828
VIN End VF3******84932803
Build Start 01/10/2006
Build End 27/03/2009

Launch Date 05/06/2006
Recalls Number R/2006/116
Make PEUGEOT
Recalls Model Information 307 (WITH EW10J4S ENGINE)
REAR AXLE FIXING BOLTS MAY BECOME LOOSE
The quality of the welding at the suspension mounting reinforcement plates may not be to specification.
Recall the vehicles that are likely to be affected and check the welding. Where necessary take corrective action to ensure that the reinforcement plate welding operation has been correctly completed.
Vehicle Numbers 221
Manufacturer Ref YBJ
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 25/01/2008
Recalls Number R/2007/189
Make PEUGEOT
Recalls Model Information 307
POTENTIAL LOSS OF ABS AND ESP FUNCTIONS
It has been identified that the operation of the ABS/ESP braking unit may be affected by the ingress of water.
Recall likely to be affected vehicles to reinforce the resistance of the ABS/ESP unit to water.
Vehicle Numbers 210973
Manufacturer Ref
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 30/04/2002
Recalls Number R/2002/091
Make PEUGEOT
Recalls Model Information 307
IGNITION SWITCH FIRE RISK
Key operation in the steering lock ignition switch may become stiff or could seize. An ignition switch seized in the start position could result in a starter motor burn out.
Replace the complete steering lock assembly.
Vehicle Numbers 28876
Manufacturer Ref XVA
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 09/01/2006
Recalls Number R/2006/005
Make PEUGEOT
Recalls Model Information 307 LHD
AIRBAG MAY DEPLOY INADVERTENTLY
The incorrect fixing of the left hand curtain airbag can lead to incorrect deployment in the case of a left hand side impact or frontal impact with a high degree of angular bias to the left.
Recall the vehicles that are likely to be affected and re-fix the airbag correctly.
Vehicle Numbers 1
Manufacturer Ref X9B
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 19/07/2005
Recalls Number R/2005/112
Make PEUGEOT
Recalls Model Information 307
RISK OF FIRE IN ENGINE COMPARTMENT
It is necessary to reinforce the sealing of electrical connections for the steering system electro pump assembly. As under certain conditions the repeated entry of salt water into this connection could cause short circuits which may lead to a fire within the engine compartment.
Recalled vehicles will have numerous checks carried out and repairs completed dependent upon what is found.
Vehicle Numbers 107767
Manufacturer Ref X8Z
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 17/06/2008
Recalls Number R/2008/094
Make PEUGEOT
Recalls Model Information 207 307 407 308 & Partner
FUSE BOX MAY CAUSE EQUIPMENT OPERATIONAL FAILURES
It has been identified that the main engine fuse box is not to the correct specification. This can result in operating faults or the failure of certain equipment.
Recalled vehicles will have the subject fuse box replaced.
Vehicle Numbers 7360
Manufacturer Ref YPK/YPR/YQY
Model 307
VIN Start
VIN End
Build Start 27/02/2008
Build End 09/06/2008

Launch Date 25/11/2005
Recalls Number R/2005/151
Make PEUGEOT
Recalls Model Information 307
CORROSION OF ELECTRICAL CONNECTION WHICH COULD CAUSE A SHORT CIRCUIT
It is necessary to check and reinforce the sealing of the electrical connections for the ABS system. As under certain conditions the repeated entry of salt water into this connection could cause short circuits which may lead to a fire within the engine compartment
Recalled vehicles will have numerous checks carried out and repairs completed dependent upon what is found.
Vehicle Numbers 151100
Manufacturer Ref X9F
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 06/10/2010
Recalls Number R/2010/157
Make PEUGEOT
Recalls Model Information 307 308 807 Expert III
LIGHTS MAY FAIL WITHOUT WARNING.
It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning.
Recalled vehicles will have the lighting management software updated.
Vehicle Numbers 2903
Manufacturer Ref YWB
Model 307
VIN Start VF3******13352715
VIN End VF3******85150233
Build Start 06/07/2007
Build End 07/03/2008

Launch Date 16/12/2010
Recalls Number R/2010/222
Make PEUGEOT
Recalls Model Information 307 308 407 607 807 & Expert II
BRAKING ASSISTANCE MAY NOT PERFORM CORRECTLY
In very rare circumstances the vacuum pump one way valve may not function correctly which could affect the level of braking assistance.
Recall the vehicles that are likely to be affected to replace the brake vacuum pump one way valve.
Vehicle Numbers 24220
Manufacturer Ref YWY
Model 307
VIN Start VF3******13325840
VIN End VF3******9Z013147
Build Start 15/12/2006
Build End 31/03/2009

Launch Date 09/07/2004
Recalls Number R/2004/117
Make PEUGEOT
Recalls Model Information 307 & 807
FAILURE OF THE THROTTLE STOP COULD LEAD TO A REDUCTION IN BRAKING ASSISTANCE
The original engine software may cause erratic operation of the motorised throttle body. This could in rare extreme cases cause the throttle stop to break. This will cause the engine to revert to limp home mode which possible may cause a reduction in braking assistance.
Install updated software in the engine ECU.
Vehicle Numbers 8599
Manufacturer Ref X5G
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 11/04/2005
Recalls Number R/2005/047
Make PEUGEOT
Recalls Model Information 206 307 and 407 (HDi models)
POSSIBLE SEEPAGE ON THE DIESEL FUEL RETURN PIPE
There is a risk of a manufacturing non conformity on the fuel injection diesel return pipe. This may lead to the possibility of fuel seepage.
As a preventive measure likely to be affected vehicles will have the pipe replaced additionally the pipe will be fitted with protective sleeves.
Vehicle Numbers 2573
Manufacturer Ref X6U
Model 307
VIN Start
VIN End
Build Start
Build End

Launch Date 03/05/2005
Recalls Number R/2005/065
Make PEUGEOT
Recalls Model Information 307CC
EXCESSIVE OSCILLATION OF THE THROTTLE VALVE
The original software may generate excessive oscillation of the motorised throttle valve which in extremely rare cases causes the failure of its throttle stop. This results in the engine operating in safety mode with a possible reduction in braking assistance.
Recall the vehicles that are likely to be affected to check the ECU and either perform a download or replace the ECU.
Vehicle Numbers 1422
Manufacturer Ref X7J
Model 307cc
VIN Start
VIN End
Build Start
Build End

Vehicle History Report

  • Sales History
  • Service History
  • Vehicle Theft Check
  • Odometer Reading
  • Market Value

Free VIN check

  • VIN lookup
  • Vehicle Specifications
  • Equipment Details
  • Fuel Efficiency
  • Ownership History

Car Recalls and Defects

  • Recalls and Defects
  • Problems & Complaints
  • Safety Ratings
  • Warranty